SSH Команды ILO3

Подключаться к ilo3 можно через SSH.
Список команд приведен ниже. Тот же список появляется, если в консоли набрать команду help.



</>hpiLO-> help

status=0
status_tag=COMMAND COMPLETED
Tue Apr 10 20:02:02 2012



DMTF SMASH CLP Commands:

help    : Used to get context sensitive help.
show    : Used to display values of a property or contents of a collection targe                                                                                        t.
create  : Used to create new instances in the name space of the MAP.
 Example: create /map1/accounts1 username=<lname1> password=<pwd12345> name=
 <dname1> group=<admin,config,oemhp_vm,oehmp_rc,oemhp_power>

delete  : Used to destroy instances in the name space of the MAP.
 Example: delete /map1/accounts1/<lname1>

load    : Used to move a binary image from an URL to the MAP.
 Example : load -source http://192.168.1.1/images/fw/iLO3_130.bin

reset   : Causes a target to cycle from enabled to disabled and back to enabled.

set     : Used to set a property or set of properties to a specific value.
start   : Used to cause a target to change state to a higher run level.
stop    : Used to cause a target to change state to a lower run level.
cd      : Used to set the current default target.
   Example: cd targetname
date      : Used to get the current date.
time      : Used to get the current time.
exit    : Used to terminate the CLP session.
version : Used to query the version of the CLP implementation or other CLP eleme                                                                                        nts.

oemhp_ping    : Used to determine if an IP address is reachable from this iLO 3.
Example : oemhp_ping 192.168.1.1 , where 192.168.1.1 is the IP address that you                                                                                         wish to ping

oemhp_loadSSHKey    : Used to authorize a SSH Key File from an URL
Example : oemhp_loadSSHKey -source http://UserName:password@192.168.1.1/images/S                                                                                        SHkey1.pub

HP CLI Commands:

POWER    : Control server power.
UID      : Control Unit-ID light.
NMI      : Generate an NMI.
VM       : Virtual media commands.
LANGUAGE : Command to set or get default language
VSP      : Invoke virtual serial port.
TEXTCONS : Invoke Remote Text Console.